Journal Entry
 |
Visit GILBERT (Gil) DUPRE (ret Electrical Engineer)'s Profile. Subscribe to this Journal: 
What is RSS?
There are 80 entries in this Journal. Status: Member Location: CHATTANOOGA, TN, USA |
|
Got It Running
Created on 2008-01-27 16:55:27
Got the carb fuel leak fixed thanks to Jimmie then found a hose leaking. Got it fixed.
started it up and drove around the block was running rough. Lots of dust needs cleaning up under hood from sanding during paint.
started it up and drove around the block was running rough. Lots of dust needs cleaning up under hood from sanding during paint.
Summary of Previous Journal Entries
Showing previous 10 journal entries:
| Title | Date | #Pic | #Cmt | Excerpt |
|---|---|---|---|---|
| Fired Up MGA | 2008-01-14 | After in paint for 2 months I decided to start it up. I have to take it back for color sand and compound. Battery was dead charged for two days no luck. Put on booster battery and ... | ||
| MGA Fender Piping | 2008-01-02 | Got one side of new piping fitted with slots cut for fender mtg bolts. Next re aligning fender to door and body and bolting down. What a job. | ||
| MC Replacement | 2008-01-01 | I completed the MC and Clutch MC replacement and took it for test drive. Clutch works great but I need to maybe bleed brakes again. | ||
| Brakes | 2007-12-30 | Finished brake and clutch MC's replacement. SS brake and clutch hoses and both master cylinders. Replaced fluid with silicone dot 5 fluid. Flushed and bled all lines. | ||
| SS Brake Line | 2007-12-23 | Well today I made more progress. I installed the driver side ss brake line. One day or days I will have to replace the front suspension rubber. It is still there after 33 years. A... | ||
| New Brake Line | 2007-12-11 | Today I installed the new ss brake line on the front passenger side. It looks like it will be long enough. Getting it to loop up and to the rear was finally accomplished by adjusti... | ||
| MC Continued | 2007-12-06 | 1 | For the last few days since the last entry I have been cleaning and installing MC box support. Today I hung the pedals. Waiting on failure swithch kit. Here is the progress photo | |
| MC Continued | 2007-12-06 | For the last few days since the last entry I have been cleaning and installing MC box support. Today I hung the pedals. Waiting on failure swithch kit. Here is the progress photl | ||
| More Master Cylinder | 2007-12-02 | 1 | Today I finished cleaning a painting the area under the master cylind box. I took out my trusty airbrush and went to work. Local dupont paint store mixed me some Bracken and it is ... | |
| Clutch Slave Cylinder | 2007-11-30 | Today I removed the clutch slave cylinder and flex line and replaced both with new ones. The flex line was the stainless steel one and I really like the way it is attached to the s... |
The contents of this journal entry (including entry images) are released
under the terms of the Creative Commons License unless otherwise noted.
under the terms of the Creative Commons License unless otherwise noted.
This page last modified December 01 2007 20:50:32 pm
Add a comment to this journal entry:
Please sign in if you already have an account or register now to enable this feature.